Fluidotherapy

Please call 800-479-2987 to order

	Dust/debris diverter Click on Picture Part # H31457	$39.50
	Fluidotherapy Brand Sleeves Side 110 - #31774 Side 115 - #31773 Made In America	$46.10
	Fluidotherapy Brand Sleeves Top Sleeves for model 110 and 115 - Net mesh # 31775	$36.72
	Fluidotherapy Brand Sleeve for Model 210 /P Top only (Net mesh) #31777	$73.44
	Side Vent replacement Kit, Screws on to fiberglass shell, removable filter- 2ea in kit #H31755	$24.40
	Bezel frame for models 110 and 115 \| # H31456	$39.50
	Medium - Specially processed and pre-dusted for use in Fluidotherapy brand equipment and TEC systems \|\| #HMED001 Comes in eco-friendly bag/box, no big plastic containers to dispose of in landfills.	$45.00 for 10 pound container.
	Fluidotherapy motor, Low current design for the 110-115-114 and 210 models, Includes bottom gasket \| #HMOT001	$94.76
	Upper Motor gasket, for vibration and noise control. \| # H31463, Lower gasket H31464, comes with motor or can be purchased separately	$4.00
	Air Finned heater assembly, 900W 15.0 Ohms \| #H31498-xxx "Please indicate either 110 or 115 model before ordering" Also available for the DHT/1480 systems.	$89.00
	H31274 thermistor for "D" style Fluidotherapy systems, 48" or 4" cripstlye for easy replacement Also available "RCA" style replacement for the upgraded units.	$32.79
	Distributor - Kyrolene poly gray ester air distribution foam. For all models of the Fluidotherapy brand systems. comes in oversize sheet, end user must cut to size. \| # HFOA005 Also available for the DHT/1480 systems.	$65.00
	Snap Disc (Thermal overtemp sensor) \| # 31798	$37.34
	Complete upgrade kit, includes wiring, power cord, circuit board, faceplate with membrane switch and thermistor. Part # 110upg or 115upg.	$682.50
	Bottom bumper Trim for model 115 (91")	$67.38
	Sleeve trim for model 115, Holds sleeves in place (P# inner-31833 outer-31834)	$ 8.50
	Static strap patient wrist band. P# HSTR002	$17.04